2021-05-12 14:32:11
RHCE認證學習:RHEL7 網路設定
VMware Workstation 12.0.1 build-3160714
Red Hat Enterprise Linux Server release 7.0 (Maipo)
一 設定網絡卡
1,編輯網絡卡組態檔
# vim /etc/sysconfig/network-scripts/ifcfg-eno16777736
HWADDR=00:0C:29:5D:34:28
TYPE=Ethernet
BOOTPROTO=static ##dhcp:自動獲取IP,static:靜態IP,none:不用協定
DEFROUTE=yes
PEERDNS=yes
PEERROUTES=yes
IPV4_FAILURE_FATAL=no
IPV6INIT=yes
IPV6_AUTOCONF=yes
IPV6_DEFROUTE=yes
IPV6_PEERDNS=yes
IPV6_PEERROUTES=yes
IPV6_FAILURE_FATAL=no
NAME=eno16777736
UUID=3af1bda7-d937-4aba-bbdf-e9c7eeef0dd9
ONBOOT=yes ##啟動network服務時是否啟用該網絡卡,yes為啟用
IPADDR=192.168.16.91
NETMASK=255.255.255.0
GATEWAY=192.168.16.1
DNS1=8.8.8.8
2,重新啟動網路服務
#systemctl restart network
二 修改主機名
#vim /etc/hostname
cnblog.localdomain
三 修改hosts
#vim /etc/hosts
192.168.16.91 cnblog.localdomain cnblog
#hostname -i
192.168.16.91
四 單網絡卡設定雙IP
1,編輯網絡卡組態檔
#cp /etc/sysconfig/network-scripts/ifcfg-eno16777736 /etc/sysconfig/network-scripts/ifcfg-eno16777736:0
# vim /etc/sysconfig/network-scripts/ifcfg-eno16777736:0
DEVICE=eno16777736:0
HWADDR=00:0C:29:5D:34:28
TYPE=Ethernet
BOOTPROTO=static
DEFROUTE=yes
PEERDNS=yes
PEERROUTES=yes
IPV4_FAILURE_FATAL=no
IPV6INIT=yes
IPV6_AUTOCONF=yes
IPV6_DEFROUTE=yes
IPV6_PEERDNS=yes
IPV6_PEERROUTES=yes
IPV6_FAILURE_FATAL=no
NAME=eno16777736
UUID=3af1bda7-d937-4aba-bbdf-e9c7eeef0dd9
ONBOOT=yes
IPADDR=192.168.16.92
NETMASK=255.255.255.0
GATEWAY=192.168.16.1
DNS1=8.8.8.8
2,重新啟動網路服務
#systemctl restart network
五 雙網絡卡系結模式
1,確定核心是否制定bonding
# cat /boot/config-3.10.0-123.el7.x86_64 | grep -i bonding
CONFIG_BONDING=m
本文永久更新連結地址:http://www.linuxidc.com/Linux/2016-01/127907.htm
相關文章